updated DIY install guide

This commit is contained in:
naturallaw77 2024-02-01 22:17:38 -08:00
parent 8c19fbacc4
commit 9d20c4686f
2 changed files with 62 additions and 70 deletions

View File

@ -1,6 +1,6 @@
# Sovran Systems does not offer any support of a DIY install of Sovran_SystemsOS. You are on your own. You can reach out to others in the matrix room https://matrix.to/#/#DIY_Sovran_SystemsOS:anarchyislove.xyz. Good Luck!
# Sovran Systems offers little support of a DIY install of Sovran_SystemsOS. You can reach out to others in the matrix room https://matrix.to/#/#DIY_Sovran_SystemsOS:anarchyislove.xyz. Good Luck!
# These instructions will change over time due to new software development and Sovran Systems creator finding more efficient ways to install Sovran_SystemsOS. 10-27-2023
# These instructions will change over time due to new software development and Sovran Systems creator finding more efficient ways to install Sovran_SystemsOS. 2-1-2024
# Also, to fully complete the install, the Bitcoin blockchain will have to download. This could take up to 3 weeks.
@ -19,9 +19,9 @@
- Second internal drive to store the Bitcoin blockchain and the automatic backups (SSD or NVME 2TB or larger)
- Also, the Second internal drive needs to be be installed FIRST into an USB enclosure. If the second drive is SSD, you need a SSD USB enclosure. If the second drive is NVME, you need a NVME USB enclosure. The USB enclosure will be plugged into the first Linux machine.
5. Working Internet connection for both machines
6. Personalized Domain names already purchased from Njal.la. See the explanation here: https://sovransystems.com/how-to-setup/
7. Your Router with ports open (Port Forwarding) to your second machine's internal IP address. This will usually be `192.168.1.(some number)` You will complete this at the end.
1. Working Internet connection for both machines
2. Personalized Domain names already purchased from Njal.la. See the explanation here: https://sovransystems.com/how-to-setup/
3. Your Router with ports open (Port Forwarding) to your second machine's internal IP address. This will usually be `192.168.1.(some number)` You will complete this at the end.
- Port 80
- Port 443
@ -43,7 +43,7 @@ wget https://git.sovransystems.com/Sovran_Systems/Sovran_SystemsOS/raw/branch/ma
then press enter.
5. Now, type `bash sdpsp.sh` then press enter.
6. Then the screen will ask for "what block..." which will be the drive in the list that is not mounted,which will be the second internal drive you just plugged in. It might be labeled `sda`, `sdb`, `sdc`, or if it is a NVME it will be `nvme0n1`, or `nvme0n2`.
6. Then the screen will ask for "what block..." which will be the drive in the list that is not mounted,which will be the drive you just plugged in. It might be labeled `sda`, `sdb`, `sdc`, or if it is a NVME it will be `nvme0n1`, or `nvme0n2` etc.
7. Then the screen will ask for "what partition...,"which will be whatever you typed into the first prompt, but with a "1" on it. For example `sda1`, `sdb1`, `sdc1`, or `nvme0n1p1` or `nvme0n2p1`.
8. Since the script is made to copy the blockchain from another Sovran Pro that already has the full blockchain installed it will throw an error. However, it should complete the setup just fine.
9. Once complete, remove the second drive from the USB enclosure and install it into your second machine in which you are installing Sovran_SystemsOS.
@ -52,9 +52,9 @@ then press enter.
### Procedure One - Installing base NixOS
1. On the first machine download the latest NixOS minimal (64-bit Intel/AMD) image from here: https://nixos.org/download
1. On the first machine download the latest NixOS <u>minimal</u> (64-bit Intel/AMD) image from here: https://nixos.org/download
2. Burn that ISO image onto the USB thumb drive.
3. Insert the newly created USB thumb drive with the ISO image burned onto it into the second machine.
3. Insert the newly created USB thumb drive with the ISO image burned onto it into the second machine (the one you are installing Sovran_SystemsOS).
4. Reboot the second machine while the USB thumb drive is inserted and boot into the USB thumb drive. This may require you to press the F7 or F12 key at boot. (Also, make sure the second machine has "safe boot" turned off in the UEFI[BIOS]).
5. Proceed with the NixOS boot menu
6. Once at the command prompt type in `sudo su` to move to the root user
@ -62,26 +62,27 @@ then press enter.
8. Type in `ip a` to get your internal IP address. It will usually be `192.1681.1.(somenumber)` make a note of this IP as you will need it later.
9. Now, that you are logged in as the root user type in or copy and paste:
```
```bash
curl https://git.sovransystems.com/Sovran_Systems/Sovran_SystemsOS/raw/branch/main/for_new_sovran_pros/psp.sh -o psp.sh
```
the command to install the base NixOS and press enter.
10. Now, type `bash psp.sh` then press enter.
11. The script will ask for name of first main internal drive. Type that in and hit enter. It usually will be `nvme0n1` if it is an NVME drive. If it is a SSD it will be `sda` or `sdb` or `sdc` etc. Basically, it will be the drive without any data and it will not be mounted per the list on the screen.
12. Then the script will ask for the 'root' partition. Type it in and press enter. It will be the LARGER partition and usually named `nvme0n1p1` if it is an NVME drive or `sda1` if it is an SSD.
13. Then it will ask for the 'boot' partition. Type it in and press enter. It will be the SMALLER partition usually named `nvme0n1p2` or `sda2`.
14. The script will finish installing the base NixOS. At the end it will ask for a root password. Type `a` and press enter and type `a` again to confirm and press enter.
15. Remove the USB thumb drive from the second machine.
16. The machine will reboot into a very basic install of NixOS command prompt.
11. The script will ask for name of first main internal drive. Type that in and hit enter. It usually will be `nvme0n1` if it is an NVME drive. Basically, it will be the drive without any data and it will not be mounted per the list on the screen.
12. Then the script will ask for the 'root' partition. Type it in and press enter. It will be the LARGER partition and usually named `nvme0n1p1` if it is an NVME drive.
13. Then it will ask for the 'boot' partition. Type it in and press enter. It will be the SMALLER partition usually named `nvme0n1p2`.
14. Then it will ask for the 'swap' partition. Type it in and press enter. It will be the drive that is close to 16GB partition usually named `nvme0n1p3`.
15. The script will finish installing the base NixOS. At the end it will ask for a root password. Type `a` and press enter and type `a` again to confirm and press enter.
16. Remove the USB thumb drive from the second machine.
17. The machine will reboot into a very basic install of NixOS command prompt.
### Procedure Two - Installing Sovran_SystemsOS
1. Now at the basic install of NixOS from step 16, type `root` to log into root and type the password `a` when asked then press enter.
1. Now at the basic install of NixOS from step 17, type `root` to log into root and type the password `a` when asked then press enter.
2. Now you are logged in as `root`.
3. Now type in or copy and paste:
```
```bash
wget https://git.sovransystems.com/Sovran_Systems/Sovran_SystemsOS/raw/branch/main/for_new_sovran_pros/sp.sh
```
@ -102,14 +103,20 @@ then press enter.
### Putting the External IP of your Sovran Pro into your new domain names you just bought at [njal.la](https://njal.la)
1. Log into your [njal.la](https://njal.la) account
2. Make a A record for each subdomain and add your Sovran Pro's external IP address to each subdomain.
2. Make a "dynamic" record for each subdomain and copy the `curl` commands after each sub-domain.
3. Paste `curl` command from njal.la website into `/var/lib/njalla/njalla.sh` .
For example:
```bash
curl "https://njal.la/update/?h=test.testsovransystems.com&k=8n7vk3afj-jkyg37&a=${IP}"
```
##### Make sure `&a=${IP}` is replaced by `&auto` at the end of each `curl` command.
### Setting the Desktop
1. Open the Terminal app and type in: `dconf load / < /home/free/Downloads/Sovran_SystemsOS-Desktop`. Do NOT log in as root.
### Setting Up Nextcloud and Wordpress
#### Nextcloud
1. Open a web browser and navigate to your domain name you bought from [njal.la](https://njal.la) for example "cloud.myfreedomsite.com" you attributed to your Nextcloud instance.
@ -122,14 +129,8 @@ then press enter.
4. Database password is found by doing this:
1. Open the Terminal app and type in or copy and paste:
```
ssh -i /home/free/.ssh/factory_login root@[one of your domain names]
```
Remove the brackets when actually executed the command, for example:
```
ssh -i /home/free/.ssh/factory_login root@myfreedomsite.com
```bash
ssh root@localhost
```
It will as you for a password which is `gosovransystems` as this is the default temporary password from Sovran Systems.
@ -153,19 +154,14 @@ then press enter.
3. Database password is found by doing this:
1. Open the Terminal app and type in or copy and paste:
```
ssh -i /home/free/.ssh/factory_login root@[one of your domain names]
```
Remove the brackets when actually executed the command, for example:
```
ssh -i /home/free/.ssh/factory_login root@myfreedomsite.com
```bash
ssh root@localhost
```
It will as you for a password which is `gosovransystems` as this is the default temporary password from Sovran Systems.
Now you will be logged in as root.
2. Now open the Terminal app and type:
`cat /var/lib/secrets/wordpressdb`
@ -179,34 +175,30 @@ then press enter.
1. Open the Terminal app and type in or copy and paste:
```
ssh -i /home/free/.ssh/factory_login root@[one of your domain names]
```bash
ssh root@localhost
```
Remove the brackets when actually executed the command, for example:
```
ssh -i /home/free/.ssh/factory_login root@myfreedomsite.com
```
2. It will as you for a password which is `gosovransystems` as this is the default temporary password from Sovran Systems.
3. Now you will be logged in as root.
3. Now you will be logged in as root.
4. Now open the Terminal app and type or copy and paste:
```
sed -i '$e cat /var/lib/nextcloudaddition/nextcloudaddition' /var/lib/www/nextcloud/config/config.php
```bash
sed -i '$e cat /var/lib/nextcloudaddition/nextcloudaddition' /var/lib/www/nextcloud/config/config.php
chown caddy:php /var/lib/www -R
chown caddy:php /var/lib/www -R
chmod 770 /var/lib/www -R
```
chmod 700 /var/lib/www -R
```
and press enter.
5. Now type or copy and paste:
1. Now type or copy and paste:
```bash
set DOMAIN $(cat /var/lib/domains/matrix) && cp -n /var/lib/caddy/.local/share/caddy/certificates/acme.-v02.api.letsencrypt.org-directory/{$DOMAIN}/{$DOMAIN}.crt /var/lib/coturn/{$DOMAIN}.crt.pem && cp -n /var/lib/caddy/.local/share/caddy/certificates/acme.-v02.api.letsencrypt.org-directory/{$DOMAIN}/{$DOMAIN}.key /var/lib/coturn/{$DOMAIN}.key.pem && chown turnserver:turnserver /var/lib/coturn -R && chmod 770 /var/lib/coturn -R && systemctl restart coturn
```
set DOMAIN $(cat /var/lib/domains/matrix) && cp -n /var/lib/caddy/.local/share/caddy/certificates/acme.zerossl.com-v2-dv90/{$DOMAIN}/{$DOMAIN}.crt /var/lib/coturn/{$DOMAIN}.crt.pem && cp -n /var/lib/caddy/.local/share/caddy/certificates/acme.zerossl.com-v2-dv90/{$DOMAIN}/{$DOMAIN}.key /var/lib/coturn/{$DOMAIN}.key.pem && chown turnserver:turnserver /var/lib/coturn -R && chmod 770 /var/lib/coturn -R && systemctl restart coturn
```
and press enter.
### Everything now will be installed regarding Sovran_SystemsOS. The remaining setup will be only for the frontend user account creations for BTCpayserver, Vaultwarden, connecting the node to Sparrow wallet and Bisq.

View File

@ -412,10 +412,6 @@ popd
#
sudo -u free flatpak remote-add --if-not-exists flathub https://flathub.org/repo/flathub.flatpakrepo
#
echo "root:$(cat /var/lib/secrets/main)" | chpasswd -c SHA512
echo "free:a" | chpasswd -c SHA512
@ -428,6 +424,10 @@ chmod 700 /home/free -R
#
echo -e "${LIGHTBLUE}One last thing, you need to put the Njalla DDNS info from Njalla into njalla.sh.${ENDCOLOR} \n"
sudo -u free flatpak remote-add --if-not-exists flathub https://flathub.org/repo/flathub.flatpakrepo
echo -e "${GREEN}All Finished! Please Reboot then Enjoy your New Sovran Pro!${ENDCOLOR} \n"
#
echo -e "${LIGHTBLUE}One last thing, you need to put the Njalla DDNS info from Njalla into njalla.sh.${ENDCOLOR}" \n
echo -e "${GREEN}All Finished! Please Reboot then Enjoy your New Sovran Pro!${ENDCOLOR}" \n