Naming: user-facing 'Wallet Connections' -> 'Lightning Wallet Connections'
across the Hub, feature registry, tile, and NixOS modules. Internal ids
(nwc-wallets, albyhub.service, /api/nwc/*) are unchanged.
UX: the service-detail modal put status, domain diagnostics, router ports,
the enable/disable toggle, restart, the liquidity guide and the whole wallet
manager in one cramped scrolling column. For this feature the modal is now
980px wide and split into two tabs:
- Wallets: wallet grid, create/share/verify flows, collapsible liquidity guide
- Service & Setup: description, status, domain checklist, ports, enable, restart
A status dot and domain chip sit in the tab bar so state is visible from both
tabs, and the modal opens on Setup when the service is off or the Lightning
Address domain is unconfigured. Wallet cards gain a balance chip, pending
badge, a prominent address row, and separated destructive actions.
Non-NWC services keep the original single-column layout and width.
Co-authored-by: arena-agent <297053741+arena-agent@users.noreply.github.com>
ReadOnlyPaths for nwc-lnurl.service now lists only the specific file
/var/lib/albyhub/unlock-password (least-privilege) instead of the
whole /var/lib/albyhub directory.
Amount-duplicate error message changed to "A single amount parameter is
required" (clearer for 2+ values than "Exactly one").
Test assertion updated to match new message text.
Blocker 1: run nwc-lnurl.service as albyhub user/group so it can read
/var/lib/albyhub/unlock-password (mode 0600, dir mode 0700).
Remove the now-unused nwc-lnurl user, group, and /var/lib/nwc-lnurl
state directory. ReadOnlyPaths updated to allow the whole albyhub dir.
Blocker 2: require exactly one amount query parameter in the LNURL
callback HTTP handler. Duplicate values now return a 400 protocol
error ("Exactly one amount parameter is required") before the helper is
called. The missing-amount and non-integer paths are unchanged.
Blocker 3: partial-funding failure message now reads "was created
successfully" instead of "already exists" to avoid confusion with a
duplicate-name error, while retaining the warning not to recreate.
Tests added:
- LnurlHandlerAmountTests — HTTP-handler level tests for duplicate (2×,
3×), single-valid, and missing amount parameters.
- test_create_partial_failure_message_says_created_successfully —
asserts exact wording of the partial-funding message.
- test_nwc_lnurl_service_runs_as_albyhub — asserts the Nix service block
sets User/Group to albyhub.
- test_nwc_module_no_separate_nwc_lnurl_user — asserts no standalone
nwc-lnurl user/group is declared.
All 229 Python tests pass (1 skipped). JS syntax clean. No secrets.
- nwc_hub_manager.py: Fix BOLT11 regex to accept only valid prefixes (bc/tb/bcrt/tbs); add path to timeout error message; add early-exit to _get_app_pending_txs pagination
- nwc_lnurl_service.py: Allow NWC_LNURL_PORT env var override for port
- nwc-wallets.nix: Remove || true from gofmt so build fails on syntax errors
- test_wallet_connections.py: Extract _call_body() helper; use c.args[] access
- sovran-hub.nix: Add nwc-lnurl launcher binary to sovran-hub-web derivation (same pattern as nwc-wallet); add options.services.sovranHub.webPackage to expose derivation to other modules
- nwc-wallets.nix: Use config.services.sovranHub.webPackage for LNURL ExecStart (fixes sys.path for sovran_systemsos_web imports); replace no-op placeholder patches with real unified diff format showing intended Go changes (Private: true, AppId *uint)
- Add nwc_hub_manager.py: AlbyHubManager with real Alby Hub API (setup, auth, CRUD, drain, delete, invoice)
- Add nwc_lnurl_service.py: dedicated loopback LNURL service on port 8181
- server.py: remove JSON scaffolding (state.json, fake invoice generator, fake NWC URI, LNURL routes); replace with real manager calls; update service maps to albyhub.service; remove LNURL auth-exempt paths
- nwc_wallet_cli.py: rewrite to use real AlbyHubManager instead of JSON state
- modules/nwc-wallets.nix: replace with albyhub user/service, nwc-lnurl service, LND macaroon, unlock-password generation
- modules/core/caddy.nix: proxy LNURL routes to port 8181 (dedicated service) instead of 8937 (Hub)
- modules/core/sovran-hub.nix: service tile points to albyhub.service
- docs/wallet-connections.md: document real architecture, Alby Hub pin/patches, backup sensitivity
- test_wallet_connections.py: replace scaffolding tests with 54 real manager tests using mocked Alby Hub
- Replace environment.etc raw script with pkgs.writeShellApplication
- Declare runtimeInputs: pkgs.coreutils, pkgs.gawk, pkgs.gnugrep
- Use awk -v for safe marker variable passing (no shell interpolation)
- Point systemd ExecStart and activation script at lib.getExe hostsUpdateScript
- Keep /etc/sovran-hosts-update.sh as a source symlink for operator discoverability
- Remove environment.systemPackages reliance
- Emit warning (not silently swallow) on activation failure
- Add structural regression tests (19 new tests, all passing)
- Use set -eu (not set -euf) in sovran-hosts-update.sh
- Add sync note for domain validation regex between shell and Python
- Rename `seen` to `unique_addresses` in _resolve_all_addresses
- Improve loopback override UI message with external DNS check guidance
- Add docstring note about first-address display in _resolve_all_addresses"
- Add modules/core/local-domain-loopback.nix: systemd service and
activation script that write configured service domains to a
Sovran-managed block in /etc/hosts (127.0.0.1 / ::1) so requests
originating on this computer reach Caddy without NAT loopback.
- Import local-domain-loopback.nix in modules/modules.nix.
- server.py: add _validate_domain_value, _is_loopback_address,
_resolve_all_addresses, _trigger_hosts_update helpers.
- server.py: update _check_domain_reachable to use --resolve so
reachability is checked locally via Caddy, not via NAT loopback.
- server.py: update _evaluate_domain_checklist, api_services inline DNS
check, and api_domains_check to recognise loopback resolution as an
intentional local override rather than a DNS mismatch.
- server.py: call _trigger_hosts_update from api_domains_set after
saving a service domain so the /etc/hosts entry is applied immediately.
- Add app/tests/test_loopback_diagnostics.py with 47 tests covering
domain validation, loopback detection, diagnostic checklist logic,
composite health, and api_domains_check."
GRD 50.x invokes pkexec internally for every grdctl --system call, even
when the caller is root. An isolated systemd script PATH does not include
/run/wrappers/bin automatically, causing exit 70 at boot.
Changes:
- Prepend /run/wrappers/bin to PATH at script start so every subsequent
grdctl --system resolves the NixOS setuid pkexec wrapper.
- Add an explicit preflight check (test -x /run/wrappers/bin/pkexec) with
a clear error message before the first grdctl_system call.
- pkgs.polkit remains absent from the service path.
- Update test_setup_runs_grdctl_directly_as_root to reflect that pkexec
now appears in the preflight check (not as a direct invocation).
- Add test_run_wrappers_bin_prepended_to_path and test_pkexec_preflight_check.
Root cause: gnome-remote-desktop-setup.service ran as root but dropped
privileges via `runuser -u gnome-remote-desktop`. Non-root grdctl --system
attempts authorisation through pkexec. The Nix-store pkexec binary is not
setuid, so every system-mode credential call silently failed while the script
still printed "configured successfully". GNOME Remote Desktop then started
without applied credentials, causing Remmina to loop at the login dialog.
Fix:
- Remove `runuser -u gnome-remote-desktop --` from grdctl_system helper;
the root-run oneshot service can call grdctl --system directly.
- Remove pkgs.polkit and pkgs.util-linux from the setup service path as
neither polkit nor runuser is needed any more.
- Update tests: rename test_setup_runs_grdctl_as_gnome_remote_desktop_user
to test_setup_runs_grdctl_directly_as_root and assert that runuser,
pkexec, and sudo are absent; add
test_privilege_escalation_packages_absent_from_setup_path.
All 21 app/tests pass.
1. Add nix-bitcoin.generateSecrets = lib.mkDefault true global compat
default in role-logic.nix so Desktop Only systems can evaluate while
nix-bitcoin is still globally imported by the flake.
2. Harden Desktop Only role: change all server/node service and feature
disables from lib.mkDefault false to lib.mkForce false so they cannot
be overridden by custom.nix or option defaults.
- sovran_systemsOS.services: synapse, bitcoin, vaultwarden, wordpress, nextcloud
- sovran_systemsOS.features: haven, mempool, element-calling, bitcoin-core
- sovran_systemsOS.web.btcpayserver
3. Make Caddy conditional in caddy.nix:
enable = needsHttpsPorts || extraVhosts != ""
so Caddy does not run on Desktop Only installs with no web services.
LiveKit was exiting cleanly with "TURN domain required" because turn.enabled
was set in the build-time config but turn.domain was never provided to the
process (the old livekit-runtime-config.service wrote a YAML that nothing
read). A clean exit (status 0) meant Restart=on-failure never restarted it,
so the Hub reported the service as Inactive.
This replaces the dead runtime-config oneshot with livekit-turn-setup.service,
which at runtime:
- reads the matrix domain from /var/lib/domains/matrix (no hardcoding)
- copies Caddy's already-issued matrix cert/key into /var/lib/livekit
- generates a complete LiveKit config (incl. turn.domain + TLS cert/key)
at /run/livekit/livekit.yaml
The livekit.service ExecStart is overridden to load that runtime config
(mirroring the existing Caddy ExecStart override pattern in
modules/core/caddy.nix), since turn.domain is only known at runtime. The cert
is delivered via LoadCredential so it is readable under DynamicUser=true
without weakening the sandbox.
Also aligns the RTC media port range (rtc.port_range_start/end = 30000-40000)
so it matches the forwarded ports, and drops the now-redundant manual
30000-40000 firewall ranges (covered by services.livekit settings/openFirewall).
- modules/core/roles.nix: re-declare bip110 as a nullOr bool no-op
option so existing custom.nix files with `lib.mkForce true` continue
to evaluate; add config.warnings block that fires only when the stale
flag is explicitly set
- server.py: add DEPRECATED_FEATURE_IDS constant; skip deprecated ids
in _read_hub_overrides and _write_hub_overrides; add
_migrate_strip_deprecated_features helper that rewrites the Hub
Managed section without deprecated lines on startup; add
@app.on_event("startup") handler _startup_migrate_deprecated_features
- RTL: rename 'Tor Access' → 'Tor Address — Access from anywhere via Tor Browser'
rename 'Local Network' → 'Local Network — Access on your home network only'
add 'How to Access' explanation credential
- Mempool: same label improvements + 'How to Access' credential
- Bitcoin Knots, Bitcoin Core, Electrs: update 'Tor Address' label to include
'Access from anywhere via Tor Browser' for consistency
Agent-Logs-Url: https://github.com/naturallaw777/staging_alpha/sessions/63c3edb0-9fbf-4dd8-91e5-404ff6e4097d
Co-authored-by: naturallaw777 <99053422+naturallaw777@users.noreply.github.com>
