The reported bug was the Hub being reachable from outside the local
network when Server + Desktop is active. c33457f guards the Caddy site
for sovransystemsos.local, but the Hub is an application that also
listens on a port of its own (8937), and a check in Caddy does nothing
for a client that never goes through Caddy. Whether a client could reach
the Hub depended on which door it used.
The Hub now asks the question itself. LanOnlyMiddleware is registered
outermost, so a client that is not on this computer or the local network
gets a bare 403 before authentication is considered; it never sees the
login page.
- Local means loopback, 10/8, 172.16/12, 192.168/16, 100.64/10
(Tailscale and other CGNAT/VPN ranges) and 169.254/16 over IPv4, and
::1, fc00::/7 and fe80::/10 over IPv6.
- IPv6 global addresses are not on the list. A global address belonging
to a laptop on the LAN cannot be told apart from a stranger's by the
address alone, and 2000::/3 is every public IPv6 address there is.
- ::ffff:a.b.c.d is read as the IPv4 address inside it.
- sovran_systemsOS.hub.extraLanNetworks adds networks (IPv4 or IPv6 CIDR)
for setups whose own devices use addresses outside those ranges. It is
checked at build time. The app ignores an entry it cannot parse and
refuses 0.0.0.0/0 and ::/0: it must never widen its policy by
guessing, and "everyone" is hub.lanOnly = false, asked for by name.
- sovran_systemsOS.hub.lanOnly (default true) turns the check off.
- The first refusal from each address is logged, naming the option to
change, so an operator whose own device is refused can find out why.
The list is capped so a scanner cannot fill the journal or memory.
Behind Caddy the policy applies to the real client, not to Caddy: uvicorn
takes the address from X-Forwarded-For only when the peer is 127.0.0.1.
Checked, not only reviewed:
- The real app with the config.json the module really generates (nix
eval on the nixpkgs revision flake.lock pins, read back from the
derivation), on a real socket with the source address chosen per
request: 127.0.0.1, 192.168/16, 100.64/10 and a declared extra
network are served; 203.0.113.9, 8.8.4.4 and an address just outside
the declared /28 get 403 on /login, / and /api/ping. /auto-login still
answers 303 to loopback and 403 to everyone else.
- With c33457f's Caddy guard in front, an IPv6 client at 2001:db8::9
passes Caddy (it is inside 2000::/3) and is refused by the Hub; an
IPv4 stranger has the connection closed by Caddy; a LAN client is
served.
- hub.extraLanNetworks accepts 203.0.113.0/28, 2001:db8:abcd::/48 and
bare hosts, and fails the build for /33, 300.1.1.1/8, 0.0.0.0/0, ::/0,
2001:db8::/129 and junk, with a message that says what to write.
Add tests/test_lan_policy.py and tests/test_hub_lan_only.py, and a note
in SECURITY.md.
LOGIN_FAIL_MAX was declared as "max failures in window before extra
delay" and then never read anywhere in the file. _record_failure() only
ever slept a flat LOGIN_FAIL_DELAY. So the Hub's entire defence against
online guessing was a constant 2 second pause per wrong password: no
escalation, no lockout, no ban, and fail2ban is configured for SSH only.
Worse, the old 60 second window could not have worked even if the
constant had been wired up. With a delay per attempt, reaching 10
failures takes about 80 seconds, so the earliest failures aged out of the
window before the count could ever reach the limit.
- security_helpers.py: new LoginThrottle. The delay ramps with the
failure count (2s, 4s, ... capped at 10s), and once LOGIN_FAIL_MAX
failures land inside the window the address is refused outright for
LOGIN_LOCKOUT_SECONDS (5 minutes). A successful login clears the
address, so an operator who fumbles a password is not penalised later.
The sleep is never taken under the lock, so one slow client cannot
stall every other login. Tracked addresses are evicted, so a
distributed sweep cannot grow the table without bound.
The window moves from 60s to 900s so the whole ramp fits inside it.
clock and sleep are injectable, which is what makes it testable.
- server.py: /api/login checks the lockout before the scrypt hash, so a
locked-out client costs almost nothing to reject, and answers 429 with
a human-readable wait instead of a bare 401.
- tests/test_login_throttle.py: covers the ramp, the cap, the lockout
firing and expiring, per-address isolation, clearing on success,
eviction, and that the limit is actually reachable inside the window.
Verified against the real app with TestClient: 10 wrong passwords return
401 and the 11th returns 429 "Too many failed attempts. Try again in
about 5 minute(s)." A correct password clears the counter.
Security Fix
naturallaw777
copilot-swe-agent[bot]andnaturallaw777